Program

The 20th International Symposium on Advanced Technology (ISAT-20)

November 23-24, 2021
Kogakuin University of Technology and Engineering, Japan

1. Main theme of ISAT-20: Advanced Technologies for SDGs

Topics of ISAT-20 include, but not limited to:

  1. Biochemistry and Food Science
  2. Synthetic Chemistry and Medicinal Chemistry
  3. Information and Communications Technology (ICT)
  4. Energy and Transportation
  5. Advanced Functional Materials
  6. Architectural and Civil Engineering
  7. Intelligent and Secure Systems
  8. Education and Human Studies
  9. Environmental Chemistry and Chemical Engineering
  10. Simulation Science, Measurement Science, Computational Science
  11. Electric Engineering and Electronic Engineering
  12. Mechanical Engineering

The symposium program will consist of key-note lectures, oral presentations, and lightning talk sessions.

Language: English will be the official language during the conference.
Conference Venue: The conference will be held by online
Conference website: https://www.kogakuin.ac.jp/isat/

2. Presentation Guidelines

Presentation Type Presentation Time
Keynote Sessions 35 minutes (LIVE)
Oral Sessions 15 minutes (LIVE)
Lightning Talk Sessions 5 minutes (pre-recorded)

Live Keynote and Oral Presentations Sessions:

The time allocated to each presentation will be:
Key-note: 35 minutes talk and 5 minutes for discussion
Oral Session: 15 minutes talk and 5 minutes for discussion.

Lightning Talk Sessions:

5 minutes pre-recorded presentation will be open to the conference website.
The presenters are required to communicate with attendees via online.

3. General Schedule

◆November 23rd

Japan
(JST)
Taiwan,
Philippines
(TST) (PTS)
Vietnam
(ICT)
 
11:45 10:45 9:45 LOG-IN AND ROLL CALL
12:00 11:00 10:00 OPENING CEREMONY
Prof. Shinichiro Ito
President, Kogakuin University of Technology and Engineering
Prof. Lu, Deng-Maw
President, Southern Taiwan University of Science and Technology
Prof. Doan Quang Vinh
Rector, The University of Danang - University of Science and Technology
Prof. Jose D. Camacho, Jr.
Chancellor, University of the Philippines Los Baños
PHOTO SESSION
12:30 11:30 10:30 KEYNOTE PRESENTATION 1
Why do animals have their shape? - Movement and shape -
Prof. Shinichiro Ito
Department of Mechanical Engineering, Faculty of Engineering
President of Kogakuin University of Technology and Engineering, Japan
13:15 12:15 11:15 KEYNOTE PRESENTATION 2
Case study of using artificial intelligence technology to construct a smart hospital
Prof. Chang, Wan-Jung,
Department of Electronic Engineering, Director of Medical and Intelligence Technology Research Center (MIT Center)
Southern Taiwan University of Science and Technology, Taiwan
14:00 13:00 12:00 BREAK, LOG-IN AND ROLL CALL
      ORAL PRESENTATION, PARAREL SESSHON
        1 2 3 4 5
14:10 13:10 12:10 ORAL1 BFS1 EEE1 ECC1 SSM1 ME1
14:30 13:30 12:30 ORAL2 BFS2 EEE2 ECC2 SSM2 ME2
14:50 13:50 12:50 ORAL3 BFS3 EEE3 ECC3 SSM3 ME3
15:10 14:10 13:10 ORAL4 SC1 EEE4 ECC4 SSM4 ME4
15:30 14:30 13:30 BREAK, LOG-IN AND ROLL CALL
      LIGHTNING TALK SESSION, PARAREL SESSHON
        1 2 3 4 5
15:45 14:45 13:45 LIGHTNING1 AFML
1-5
EEEL
1-5
ICTL
1-5
SSML
1-4
MEL
1-4
16:15 15:15 14:15 LIGHTNING2 AFML
6-9
EEEL
6-10
ICTL
6,8,9,11,12
SSML
5-8
MEL
5-7
16:45 15:45 14:45 BREAK
17:00 16:00 15:00 LIGHTNING3 BFSL
1-4
EEEL
11-15
ICTL
7,10,13,14
EHSL
1-3
ACEL
1-6
17:30 16:30 15:30 LIGHTNING4 BFSL
5-8
EEEL
16-19
ICTL
15-18
ISSL 1
ETL
1-3
ECCL
1-4

◆November 24th

Japan
(JST)
Taiwan,
Philippines
(TST) (PTS)
Vietnam
(ICT)
 
11:45 10:45 9:45 LOG-IN AND ROLL CALL
12:00 11:00 10:00 KEYNOTE PRESENTATION 3
Development of BK-Anticovid Robot
Dr. VO Nhu Thanh and Dr. LE Hoai Nam
Mechatronic Division, Faculty of Mechanical Engineering,
University of Science and Technology, The University of Da Nang, Viet Nam
12:45 11:45 10:45 KEYNOTE PRESENTATION 4
Honorable Danilo L. Concepcion
President, University of the Philippines
13:30 12:30 11:30 BREAK, LOG-IN AND ROLL CALL
      ORAL PRESENTATION, PARAREL SESSHON
        1 2 3 4 5
13:40 12:40 11:40 ORAL5 AFM1 ACE1 ICT1 EHS1 ME5
14:00 13:00 12:00 ORAL6 AFM2 ACE2 ICT2 EHS2 ME6
14:20 13:20 12:20 ORAL7 AFM3 ACE3 ICT3 EHS3 ME7
14:40 13:40 12:40 ORAL8 AFM4 ACE4 ICT4 EHS4 ME8
15:00 14:00 13:00 BREAK
15:20 14:20 13:20 ORAL9 AFM5 ACE5 ICT5 EHS5 ME9
15:40 14:40 13:40 ORAL10 AFM6 ACE6 ICT6 EHS6 ME10
16:00 15:00 14:00 ORAL11 ET1 ACE7 ICT7 EHS7 ME11
16:20 15:20 14:20 ORAL12     ISS1 EHS8 ME12
16:45 15:45 14:45 BREAK, LOG-IN AND ROLL CALL
17:00 16:00 15:00 AWARDING CEREMONY
17:30 16:30 15:30 CLOSING CEREMONY
The Next Host:Prof. Doan Quang Vinh
Rector of The University of Danang - University of Science and Technology

Oral Presentation

Advanced Functional Materials

Presentation No. Title  
AFM1. Facile hydrothermal synthesis of interlayer-expanded MoS2/rGO Kien Nguyen-Ba, Huy Le-Quoc, Trang Nguyen-Thi-Thu, and Khan Dinh-Thanh
AFM2. Fabrication of Anodic Aluminum Oxide Templates Lance Tristan Oliver Roncal Pengson, M. Vasquez Jr
AFM3. Carrier gas type dependence of Ga2O3 thin film grown by mist Chemical Vapor Deposition Rie Yamada, S. Takahashi, A. Sekiguchi, T. Onuma, T. Honda, and T. Yamaguchi
AFM4. A Study on Smart Fluid Technology and its Applications in Haptics Aaron Raymond See, Kohila Chandramohan
AFM5. Growth of GaInN multi quantum well on strain-controlled layer by RF-MBE toward realization of light emitting diodes operating in red spectral region Masaki Matsuda, R. Yoshida, K. Tahara, T. Yamaguchi, T. Onuma, and T. Honda
AFM6. Fluorescent immune-biosensor on the glass biochip used for albumin detection Ying-Nien,Chou, Lien-Chiang,Hung

Architectural and Civil Engineering

Presentation No. Title  
ACE1. Study on Optimum Room Temperature in Offices with Thermal Controllable Chairs Shintaro Hanazono, Tatsuo Nobe
ACE2. Optimized artificial neural network model to classify tasks in construction and project management field Trang Thi Phuong Pham
ACE3. Application of Biological Process for Enhancing Carbonation of MgO Cement Huyen Thanh Do, Tung Hoang
ACE4. Detachment diagnosis based on frequency characteristics using a tile specimen with a pseudo-dissociation part Tatsuya Yamada, Masaki Tamura, Nobuyuki Sanjoba
ACE5. Pineapple Core Sugar Extract as Set Retarder in Cement Paste Rondel Arganza Dela Cruz
ACE6. Non-Ergodic Probabilistic Seismic Hazard Analysis using Physics-Based Ground Motion Prediction: A Case of L'Aquila, Italy Jedidiah Joel Carlos Aguirre, Bruno Rubino, Maurizio Vasallo, Guiseppe di Guilio, Francesco Visini
ACE7. A mathematical model of two-dimensional vertical flow based on the dual approach The-Hung NGUYEN

Biochemistry and Food Science

Presentation No. Title  
BFS1. Crab-eating monkey acidic chitinase: strong chitinolytic activity under the various conditions Maiko Uehara, E. Tabata and F. Oyama
BFS2. Performance of Aerobic Rice Under Different Levels of N-Fertilizer Using Surface Irrigation and Drip Fertigation Abigail R Barredo
BFS3. The Use of Machine Vision for Postharvest Processing of Achacha Fruits Nai-Shang Liou, Ngo Minh Tri Nguyen, Quoc Thien Pham, Hoang Huy Nguyen

Education and Human Studies

Presentation No. Title  
EHS1. Evaluation of internal rotation gait and normal gait based on the interarticular coordination Natsuki Sai, Tatsuro Sato, Shinichiro Morichi, Satoru Kizawa, and Ayuko Saito
EHS2. A study on coordination between a line of sight and motion of body during hitting a ball with a racket Toshikazu Yagi, Satoru Kizawa, and Ayuko Saito
EHS3. Study on the movement during walking beautifully and the perception of beauty Yura Honda, Shogo Takeuchi, Jun Muramatsu, Satoru Kizawa, Masaki Tamura, and Ayuko Saito
EHS4. Research on recognition of movement using an optical motion capture system Shun Shiotani, Satoru Kizawa, Masaki Tamura, and Ayuko Saito
EHS5. A New Perspective on English Education for Engineering Majors
–Optimizing English Education at Kogakuin University–
Tomoko Wada
EHS6. A Practical Report on English Education at Kogakuin University:
A Lesson from Basic English I/II
Takayuki Akimoto
EHS7. English Education in the Age of SDGs:
A Survey on English Learning among Kogakuin University Students
Tomomi Yamada, Kazunori Suzuki
EHS8. An Application of CNN in Answer Analyzing and Estimation Education Advanced Technology Nguyen Hoang Mai

Electric Engineering and Electronic Engineering

Presentation No. Title  
EEE1. Examination of Improvement of Supply Stability by Introducing Wind Power Generation in Disaster-robust Zero Energy Vehicle(D-ZEV) Bian Ning, Yasuhiro Noro
EEE2. ElderFit: A Physical Fitness Motion Detection System for Older Adults Based on Deep Learning Technology Wan-Jung Chang, Jian-Ping Su
EEE3. Investigation of the Relationship between Muscle Strength and the Power of Electromyograph Signal Chun-Ju Hou, Yen-Ting Chen, Ji-Jer Huang, and Mycel Capilayan
EEE4. Optimization for elevation-plane beam configuration in 3D beamforming technology Yuji Omura, Hiroyuki Otsuka

Energy and Transportation

Presentation No. Title  
ET1. Home Energy Management System Considering Stationary Storage and Electrical Vehicle Jeeng-Min Ling, Firoj Ismail Mulani

Environmental Chemistry and Chemical Engineering

Presentation No. Title  
ECC1. Development of low-fouling microfiltration membranes with high permeability by blending PVDF with poly (2-methoxyethyl acrylate) Seiya Ohno, Shin-ichi Nakao, Xiao-lin Wang, Kazuki Akamatsu
ECC2. Application of wastewater treatment by microalgae cultivation technology for aquatic products processing facilities Xuan Thanh Nguyen Thi, Nguyen Quốc Vương, Nguyen Hoang Minh
ECC3. Investigation and optimization of harvesting microalgae using Electro-coagulation and flotation (ECF) method Nguyen Nhat Cuong, Nguyen Thi Thanh Xuan
ECC4. Separation mechanism of carbon dioxide through CHA membrane under high pressure Fumiya Hirosawa, Masaya Miyagawa, and Hiromitsu Takaba

Information and Communications Technology (ICT)

Presentation No. Title  
ICT1. Beautification Algorithm for Handwritten Characters Based on Deep Learning Ko-Ting Wu, Qiu Chen
ICT2. An approach for ceramic tile defects classification based on genetic algorithm and CNN Nhat-To Huynh
ICT3. Creating Strong AIWolf Agents using Systematic Tactical Evaluation Shunsuke Hatta, Keisuke Takahashi, Kazunari Furukawa, Junji Yamato
ICT4. A Study on Optical Burst Transfer Method in Torus Type Data Center Network Yuya Ogino, Ken-ichi Baba
ICT5. Effect of cell range expansion of picocells with a wide bandwidth in multiband HetNets Ayumi Yoneyama, Hiroyuki Otsuka
ICT6. Impact of phase noise for OFDM-based 1024-QAM transmission Daisuke Kosuge, Hiroyuki Otsuka
ICT7. A Study of QUIC and Application Development Jiun-Yu Tu, Pei-Ying Tsai, Ya-Ting Zhuang

Intelligent and Secure Systems

Presentation No. Title  
ISS1. Verification of Dentition Shape Extraction Method Yutaro Iso, Kazuhiro Suga

Mechanical Engineering

Presentation No. Title  
ME1. Flow Characteristics of an Excited Jet with a Time-varying Velocity Distribution Chisato Ichihara, K. Nishibe, and K. Sato
ME2. Influence of secondary synthetic jet on vortex arrangement in combined jet Yu Tamanoi, Koichi Nishibe, and Kotaro Sato
ME3. Fundamental study on jet vectoring by circulation control wing Shoichi Fukui, Shoichi Fukui, Qiang Zhang, Kotaro Sato
ME4. Performance Evaluation of Soccer Balls with Different Panel Shapes Kaito Tada, Shinichiro Ito, and Masaki Hiratsuka
ME5. FLOW CHARACTERISTICS AROUND A DOUBLE-SLOTTED CIRCULATION CONTROL WING Daiki Yaguchi, T. Nakayama, and K. Sato
ME6. VORTEX ARRANGEMENT OF SYNTHETIC JETS GENERATED BY ASYMMETRIC SLOTS Takumi Ito, Kotaro Sato
ME7. INFLUENCE OF SECONDARY FLOW INDUCED ON COANDA SURFACE ON JET DEFLECTION CHARACTERISTICS Minoru Nakagawa, K. Sato
ME8. Interaction between Continuous Jet and Synthetic Jet under the Same Momentum Ratio Conditions Masaharu Mori, J. Matsuzaki, N. Ajino, K. Nisibe, and K. Sato
ME9. INFLUENCE OF SECONDARY SUCTION/BLOWING FLOWS ON PRIMARY JET Akio Yamada, K. SATO and D. KANG
ME10. Development of Self-Lubricating Slide Bearings with Sintered Porous Metals Taiga Itoi, S. Kawajiri, Y. Sasaki, E. Takami, Y. Fujita and M. Shiomi
ME11. Development of a finite element model for mechanical analysis on colonic stent – organs interface Minori Kunii, Kazuhiro Suga
ME12. Measurement and Compensation of the 3D Printing using 2.5D Characterization Yu-Sheng Lin

Simulation Science, Measurement Science, Computational Science

Presentation No. Title  
SSM1. Effect of femur and tibia marker positions on measuring ankle joint angles in optical motion analysis Natsuki Nakamura, Satoru Kizawa, and Ayuko Saito
SSM2. Effect of actuator on muscle force estimation using a musculoskeletal model Takuto Hosoya, Tomoaki Ichikawa, Shinichiro Morichi, Yoshikazu Kobayashi, Satoru Kizawa, and Ayuko Saito
SSM3. Study on design of a noise covariance in pose estimation using 9-axis motion sensor Hayato Sato, Kentaro Goto, Satoru Kizawa, and Ayuko Saito
SSM4. A study on effect of geomagnetic sensor correction for pose estimation Kentaro Goto, Hayato Sato, Satoru Kizawa, and Ayuko Saito

Synthetic Chemistry and Medicinal Chemistry

Presentation No. Title  
SC1. Surface Functionalization of Chitosan Hydrogel Using Atmospheric Pressure Kathrina Lois M Taaca, Mark Jeffry De Leon, Hideki Nakajima, Kanjana Thumanu, Eloise Prieto, and Magdaleno Vasquez Jr.

Lightning Talk Session

Advanced Functional Materials

Presentation No. Title  
AFML1. Effect of visible light for photocatalytic property of TiO2/Cu2O thin films Katsuyuki Takeda, Ichiro Takano
AFML2. Dependence on Ar incident angles of PTFE surface treated by plasma Yoshitaka Nakayama, Ichiro Takano
AFML3. Analysis of High Thermal Conductivity Mechanism of Naphthyl Benzoate-Twin Mesogenic Epoxy Polymers with Alkyl Chain Length 2 Having 2,7-Naphthyl Benzoate as the Mesogenic Skeleton Yuu Miyama, T. Kawai, and Y. Itoh
AFML4. Hardness of alumina film formed on aluminum by anodic oxidation with oxalic acid and alcohol Takuma Sano, Hidetaka Asoh
AFML5. Study on high thermal conductivity mechanism of phenyl benzoate twin-mesogen epoxy polymers by vibrational spectroscopy Takeru Ishizawa, T. Kawai, and Y. Itoh
AFML6. Influence of a CuO layer for conversion efficiency of CuO/TiO2 thin films Masaki. Yanagisawa, Ichiro. Takano
AFML7. Theoretical calculation of infrared absorption spectra of hydrogen in various polymers under high-pressure hydrogen Masayoshi Tsuji, T. Kawai and Y. Itoh
AFML8. Improvement of Electrical Property of α-In2O3 Films Grown by Mist Chemical Vapor Deposition Using In2O3 Powder as Source Precursor Akito Taguchi, T. Onuma, T. Honda, and T. Yamaguchi
AFML9. Study on thermal conductivities of poly(methacrylic acid ester) having azobenzene as a mesogen with different spacer carbon numbers and the end group carbon numbers Nanako Sakai, Tadatomo Kawai, and Yuzo Itoh

Architectural and Civil Engineering

Presentation No. Title  
ACEL1. Evaluation of Plaster Layer of Wood lath and Plaster Ceiling in Non-Destructive Testing Sakura Yoshida, Kentaro Oka, Masaki Tamura
ACEL2. Quantitative evaluation of the deterioration state of the modified wood shingle exposed outdoors and construction of an index to judge the deterioration Hideto Takeuchi, Masaki Tamura
ACEL3. Examination of resin repair method for wood damaged by termites Yusuke Harada, Masaki Tamura
ACEL4. Study on transportation power in DHC area for the AEM Ryuhei Tanaka, Yusuke Nakajima
ACEL5. History and development of wood lath and plaster techniques in Japan Kentaro Oka, Masaki Tamura
ACEL6. GIS-Based Assessment of Emergency Referral Systems and Ideal Locations for Ambulance Stations in the Province of Cavite, Philippines Kathleen Ann E. Villapol, Jedidiah Joel C. Aguirre, Judie Ann A. Ramos, and Harvey S. Maunahan

Biochemistry and Food Science

Presentation No. Title  
BFSL1. Investigation of extraction method for antimicrobial substances accumulated in aerial microalgae Toshihiro Sekizawa, Nobuhiro Aburai, and Katsuhiko Fujii
BFSL2. Isolation of lichen photobionts by a density gradient centrifugation Kotomi Hirose, Nobuhiro Aburai, and Katsuhiko Fujii
BFSL3. Development of microflora which produces hydrogen from digested sludge Yuhei Hayakawa, Nobuhiro Aburai, and Katsuhiko Fujii
BFSL4. The ability of wild Bacillus sp. to produce polyglutamic acid Suzuka Sato, Nobuhiro Aburai, and Katsuhiko Fujii
BFSL5. Screening of carotenoid-rich aerial microalgae Yuta Hiki, Nobuhiro Aburai, and Katsuhiko Fujii
BFSL6. Functional Properties of Chitin Deacetylase from Aspergillus fumigatus Hidetoshi Suzuki, Masashi Ohkura, Kazuaki Okawa and Fumitaka Oyama
BFSL7. Mechanistic insights of inactivation of YKL-40, a chitinase-like protein Keita Suzuki, Kazuaki Okawa, and Fumitaka Oyama
BFSL8. Component imaging of spheroids by using an FIB-TOF-SIMS Tomoki Goto, Hyogo Takeuchi, Mizuki Shu, Reiko Saito, Kazuya Matsushima, Makoto Saito, Sanshiro Hanada, Nobuhiko Kojima, Masato Morita, and Tetsuo Sakamoto

Education and Human Studies

Presentation No. Title  
EHSL1. Effects of Skin and Water Conditions on Water Surface Perception Kohei Kawamata, Miyuki G.Kamachi
EHSL2. Influence of eating Meals on facial expressions Mao Maekawa, Miyuki G. Kamachi
EHSL3. A study of facilitation evaluation methods in group discussions for students Takuya Hirayanagi, Daigo Misaki

Electric Engineering and Electronic Engineering

Presentation No. Title  
EEEL1. UV-irradiated fabrication of SWCNT/SiO2 Composite thin film at room temperature via Molecular Precursor Method Naoki Ogawa, Hiroki Nagai, and Mitsunobu Sato
EEEL2. Fabrication of visible-light responsive WO3 Thin Film via Molecular Precursor Method Taichi Murayama, H. Nagai, and M. Sato
EEEL3. Remarkable mechanical flexibility of intentionally strain-induced amorphous B-doped In2O3 transparent conductive film Shun Mori, Yukiya Ichinoseki, Kotaro Watanabe, Kaito Murano, Kaito Oe and Shinya Aikawa
EEEL4. Understanding the switching mechanism of stacked ZrO2-based ReRAM by insertion of SiOx thin layer at the electrode interfaces Keito Toyama, Ryusuke Akiyama, Kento Yuki and Shinya Aikawa
EEEL5. Residual strain in GaN nanocolumns grown on Si(111) Naoki Goto, Y. Hosoya, T. Onuma, T. Yamaguchi, and T. Honda
EEEL6. Identification of Killer Defects in β-Ga2O3 Schottky Barrier Diodes by Raman Mapping Measurements Masahiko Nakanishi, K. Shoji, S. Masuya, M. Kasu, T. Yamaguchi, T. Honda, K. Sasaki, A. Kuramata, and T. Onuma
EEEL7. p-type behavior of lattice-expanded SnOx by post-deposition N2 annealing Kotaro Watanabe, Takuma Kawaguchi, and Shinya Aikawa
EEEL8. Relationship between resistivity of NiO thin films and oxygen plasma condition at different deposition pressures Mamoru Murayama, A. Ishikawa, T. Yamaguchi, T. Honda, K. Sasaki, A. Kuramata, and T. Onuma
EEEL9. Measurement of Flexoelectric Coefficient (e11-e33) Using HAN Cells with Concentric-shaped Interdigitated Array Electrodes Hiroki Shimoda, Yukihiro Kudoh, and Taiju Takahashi
EEEL10. Well width dependence on residual strain in high In composition GaInN/GaInN MQW by RF-MBE Kaigo Tahara, J. Yamada, T. Yamaguchi, Y. Nanishi, T. Onuma, T. Honda, and K. Kishino
EEEL11. Micro scale analysis of LFP cathode of all solid state battery by FIB TOF SIMS Akihiro Kawasugi, Naoki Gomyo, Linchun He, Masato Morita, and Tetsuo Sakamoto
EEEL12. Development of resonance ionization mass spectrometry imaging method for radioactive Sr isotopes analysis Takeru Yoshida, Takumi Umedate, Masato Morita, Tetsuo Sakamoto, Yue Zhao, Vollker Sonnenschein, Hideki Tomita, Toshihide Kawai, Takeo Okumura, Yukihiko Sato, Masabumi Miyabe and Ikuo Wakaida
EEEL13. Trade-off relation of F concentration in CaF2 co-sputtered In2O3-based transparent conductive film Kaito Oe, Shun Mori, Kotaro Watanabe and Shinya Aikawa
EEEL14. Emission Properties of Rocksalt-structured MgZnO Microcrystals for VUV Light Emitter Wataru Kosaka, S. Hoshi, K. Kanta, K. Kaneko, T. Yamaguchi, T. Honda, S. Fujita, and T. Onuma
EEEL15. Analysis of aerosol in urban city air using FIB-TOF-SIMS Kentaro Sakai, Shokei Tsuchida, Noa Kato, Masato Morita, and Tetsuo Sakamoto
EEEL16. Validation of Spray Droplets by ESD for a New Technique of Single Cell Rapid Freezing Takayuki Umemura, Kenta Shirasu, Masato Morita, Kumiko Nagase, Wakako Hamanaka,
Masatoshi Kakihana, Tatsuo Ohira, Norihiko Ikeda and Tetsuo Sakamoto
EEEL17. Anatase Thin-Film Fabrication by Novel Precursor Solution Involving Stable Trisoxalato Complex of Ti (IV) without O22– Coordination Takuro Murayoshi, H. Nagai, and M. Sato
EEEL18. Humidity dependency of the ionic conductivity of Li1+xAlxTi2-x(PO4)3 transparent thin films fabricated by molecular precursor method Kazuma Aochi, H. Nagai, and M. Sato
EEEL19. Impact on InN Buffer Layer Inserted into GaInN/GaN Interfaces By RF-MBE Daiki Itabashi, Ryosuke Yoshida, Tomohiro Yamaguchi, Takeyoshi Onuma, Tohru Honda

Energy and Transportation

Presentation No. Title  
ETL1. Optimization of Service Frequency based on Short-term Passenger Forecasting on Scheduled Bus
-Case Study on the Route for Kogakuin University-
Yuya Nagai, Yoshio Miki
ETL2. Study on Driving Skill Analysis in Curve Sections using Adaboost Algorithm with Driving Simulator Eisho Kanno, Masakazu Mukai
ETL3. Development of Operando Raman Analysis at the Reaction Cross-Section of All-Solid-State Batteries Takaaki Ono, Koji Hiraoka, Hibiki Miyauchi, Takeshi Kobayashi and Shiro Seki

Environmental Chemistry and Chemical Engineering

Presentation No. Title  
ECCL1. Exfoliation Behavior of Graphite in Sulfuric Acid Electrolyte Ryuichi Maekawa, Yusuke Muramatsu, Takumi Hisadome, and Hideki Hashimoto
ECCL2. Metylation Benzene with Methane Catalyzed by Co/MFI Zeolite Kai Tanaka, K.Okumura
ECCL3. Preparation a Series of Polybenzimidazole Random Copolymer Membranes based on a Polyphosphoric Acid Process Hsiao-Wu Lai, Zhi-You Lin, and Cheng-Chien Wang
ECCL4. Application of single-particle electrochemical measurement for various positive electrode materials Tamotsu Sawahashi, Kasane Takai, Kei Nishikawa, Takeshi Kobayashi, and Shiro Seki

Information and Communications Technology (ICT)

Presentation No. Title  
ICTL1. Design Thinking-based Requirements Elicitation Method using Role-Based Prototyping and its Evaluation Senju Nakajima, Takayuki Kitagawa, Tadahisa Kondo, and Mari Inoki
ICTL2. The bottleneck of MTD System Operation Shintaro Kawamura, Osamu Mizuno
ICTL3. A Study on Access Control Methods in IoT Data Distribution using Fog Computing Masaki Yoshii, Ryohei Banno, and Osamu Mizuno
ICTL4. Non-functional Requirements Summarization Method Using Convolutional Neural Network and Domain Ontology Yuta Saikawa, Takeshi Nagaoka, Takayuki Kitagawa, and Mari Inoki
ICTL5. Determination of intermittent defects by a method that focuses on the rows before and after the defective shot Yusuke Takada, Yoshio Miki
ICTL6. Transmission Control in DTN Considering Data Amount Hiyu Suzuki, Osamu Mizuno
ICTL7. Fast Adjacent Communication with RDMA and Double Buffering Kota Yoshimoto, Akihiro Fujii, and Teruo Tanaka
ICTL8. Preliminary Experiments for the Realization of ICN based Wireless Sensor Networks Eishin Nagaoka, Masaki Yoshii, Ryohei Banno and Osamu Mizuno
ICTL9. Personalization of Service Controller for Home Network Devices Taich Kimura, Osamu Mizuno
ICTL10. Parallelization of Automatic Tuning using Multiple Jobs
for Machine Learning Programs
Sorataro Fujika, Teruo Tanaka, Akihiro Fujii, Yuka Kato,
Satoshi Ohshima, andTakahiro Katagiri
ICTL11. A Method for Detecting Anomalies in IoT Devices Using LSTM Yutaro Nakamura, Osamu Mizuno
ICTL12. A Study of Applying Plumtree Algorithm for Blockchain Networks Yusuke Kitagawa, Kazuyuki Shudo, Osamu Mizuno, Ryohei Banno
ICTL13. PAPR Reduction Effect by Applying Clipping in Spectrum Suppressed Transmission Teppei Kanke, Takatoshi Sugiyama
ICTL14. Performance Analyses of Efficient Belief Propagation Bit-flip Decoding Schemes for Polar Codes with Permutated Factor Graphs Hidetoshi Saito, Naoya Takahashi
ICTL15. Interleaving Depth Optimization for Concatenated FEC in 2.4GHz Ingenu System Kentaro Yamamoto, Takatoshi Sugiyama
ICTL16. Calculated Distance Error Performances by Relay Type GPS
in Shinjuku Area
Kouhei Yoshida, Takatoshi Sugiyama
ICTL17. The Child's Residual Limb Model Reconstruction by using Point Cloud Data Ding-Horng Chen, Qiao-Ting Shen
ICTL18. An Image Segmentation Method based on Unsupervised Learning Algorithms Zong-Xian Yin

Intelligent and Secure Systems

Presentation No. Title  
ISSL1. Wired cable proposal on the feasibility of a stratospheric platform
-Background and wired connections and strategies for orbital elevators-
Koichiro Murata

Mechanical Engineering

Presentation No. Title  
MEL1. Research on Motion Analysis of Pedestrians Using OpenPose Genki Bamba, Kazuki Weerakoon Miyakawa,Takashi Kato, and Daigo Misaki
MEL2. Audio glasses for confining acoustic field in near field Shuzo Terauchi, Tsutomu Kaizuka
MEL3. Jet formation after droplet impact into water pool Futa Minami, K. Hasegawa
MEL4. Visualization of vibration behavior of multiple samples levitated in an acoustic field Manami Murata, K. Hasegawa
MEL5. Study on the presentation method of the automated driving experience simulator by wizard of oz prototyping Kazuki Miyakawa Weerakoon, Genki Bamba, Takashi Kato, and Daigo Misaki
MEL6. Development of a robot to assist in optimal parts supply at cell production sites Shutaro Ito, Daigo Misaki
MEL7. Development of Self-Lubricating Slide Bearings with Sintered Porous Metals Taiga Itoi, S. Kawajiri, Y. Sasaki, E. Takami, Y. Fujita, and M. Shiomi

Simulation Science, Measurement Science, Computational Science

Presentation No. Title  
SSML1. Theoretical study on interfacial interaction of zig-zag carbon nanotubes/epoxy resin nanocomposite Yurika Serizawa, Tomoe Yayama, and Fumiko Akagi
SSML2. Predicting of Pedestrian Trajectory Using Sequence to Sequence Learning with Neural Networks Tomoya Ono, Takashi Kanamaru
SSML3. Separation Control around NACA0015 Airfoil using Vortex Generator Type Plasma Actuator over Low Reynolds Number Conditions Shota Mayahara, Makoto Sato
SSML4. GPS Positioning Error Improvements
by Number of Reflections and Incident Angle Estimations
Koichi Saito, Takatoshi Sugiyama
SSML5. Extraction of useful products from specialty stores using clumpiness Taro Numase, Yoshio Miki
SSML6. Examination of Measures to Encourage Unplanned Purchasing Using Social Norms at Specialty Stores Ryou Miyokawa, Yoshio Miki
SSML7. Non-Invasive Concentration Variation Measurements of Chemical Solutions by Using a Birefringent Sensing Head in a Heterodyne Interferometer Ruey-Ching Twu, Yi-Ren Sun
SSML8. Computational Framework for Predicting the Surface Morphology of Laser Powder Bed Fusion Parts after Laser Polishing Dac - Phuc Pham, Hong - Chuong Tran